Guide About How To Deploy ONT Service

Guide About How To Deploy ONT Service
  • Guide About How To Deploy ONT Service

  • Views 12

  • Downloads 1

  • File size 2MB
  • Author/Uploader: Demian Roman

Security Level:

Guide about how to deploy ONT service

www.huawei.com

HUAWEI TECHNOLOGIES Co., Ltd.

HUAWEI Confidential

Upgrade ONT through ONT Web(1)

1. Make PC connected ONT LAN port, and login ONT Web. 2. Click “Browse” button to select R16C10SPC138 version file” HG8245HV300R016C10SPC138_common_all.bin”, and then click “Upgrade” to start upgrade Page 2

Upgrade ONT through ONT Web(2)

3. The upgrade will take a few minutes, and wait please.

4. After upgrade finish, please click “Restart” to reset ONT. And the ONT will restart using the new version.

Page 3

Input LOID through ONT Web of R16C10SPC138

1. Input LOID through ONT Web. After ONT is authenticated on OLT successfully, the upper business configuration system will trigger to deploy ONT service. 2. Please test and check whether the services client applies are normal, for example check and confirm with customer whether the Internet, VoIP, or IPTV is normal .

Page 4

Suggestions on Wi-Fi ONT Configuration Basic parameter configuration:

Broadcast SSID: Selected Enable WMM: Selected Authentication Mode: WPA/WPA2 PreShareKey Encryption Mode: TKIP&AES

The configuration is recommended to use the default value, consistent with the screenshot

Suggestions on Wi-Fi ONT Configuration Advanced parameter configuration:

TX Power: 100% Regulatory Domain: Honduras Channel: Automatic Channel Width: 20 MHz Other Parameters: Use Default

Suggestions on the Installation Location of a Wi-Fi ONT (1)  ONTs cannot be placed in a metal box.

ONT placed in a narrow space, affecting Wi-Fi coverage

 ONTs cannot be placed under a metal shelf.

ONT Wi-Fi signals are reflected by the metal shelf above.

Suggestions on the Installation Location of a Wi-Fi ONT (2)  Open and wide environments are good for the transmission of Wi-Fi signals.

Blocked ONT antennas, affecting WiFi coverage ONT placed in an open area without obstacles

 No obstacle is allowed in the transmission direction of the ONT antennas.

Suggestions on the Installation Location of a Wi-Fi ONT (3)  A 30 cm (or above) space shall be reserved around an ONT if the ONT is placed on a desk.

ONT placed in a narrow space, impairing Wi-Fi coverage

 Do not mount an ONT on a thick or tiled wall.

ONT placed in a corner, causing weak Wi-Fi signals

Suggestions on the Installation Location of a Wi-Fi ONT (4) Placing an ONT on a monitor affects Wi-Fi signal transmission and ONT heat dissipation.

 Do not place an ONT on other electronic devices, such as settop box (STB), player, or monitor. Otherwise, Wi-Fi signal transmission will be greatly affected.

Placing an ONT on an STB or other electronic devices affects Wi-Fi signal transmission and ONT heat dissipation.

 Do not place ONTs near any interference sources.

Suggestions on the Installation Location of a Wi-Fi ONT (5) Wi-Fi signal transmission of an ONT placed in a low position at a small office is affected by desks and employees’ movements.

Do not place ONTs in a low position with various obstacles or near a ceiling with metal obstacles.

Wi-Fi signals of an ONT placed on a metal support or air conditioner near a ceiling are blocked.

Suggestions on the Installation Location of a Wi-Fi ONT (6) ONT placed on the ground and near a corner, affecting Wi-Fi coverage

Do not place ONTs on the ground. Otherwise, ONTs are blocked by various obstacles, and Wi-Fi signal transmission is therefore affected. Place ONTs in a high and wide area. Wi-Fi signal transmission of an ONT placed in a low position at a small office is affected by desks and employees’ movements.

Suggestions on the Installation Location of a Wi-Fi ONT (7) In a one-floor house, confirm the positions where the Wi-Fi network is frequently used.

 Put the ONT in the bedroom if the user uses the Wi-Fi network only in the bedroom.  Put the ONT in the middle of different rooms if the user requires Wi-Fi coverage in all these rooms.

Put the ONT in the middle of different rooms if the user requires Wi-Fi coverage in all these rooms.

Put the ONT in the bedroom if the user uses the Wi-Fi network only in the bedroom. Through 2 walls

Position selection to minimize through the wall or obstacles Through 1 wall

Suggestions on the Installation Location of a Wi-Fi ONT (8)

 In a multi-floor house, put the ONT on the middle floor.  Note that an ONT is not enough to

provide Wi-Fi coverage for an entire villa or big house. In this case, the full

Wi-Fi coverage solution is recommended.

In a multi-floor house, put the ONT on the middle floor.

Suggestions on the Antenna Direction of a Wi-Fi ONT (1) Recommended antenna direction for a one-floor house:

Suggestions on the Antenna Direction of a Wi-Fi ONT (2) If an ONT is installed on one floor of a multi-floor building and there is no station on this floor, adjust the 2 ONT antennas to the horizontal direction.

Suggestions on the Antenna Direction of a Wi-Fi ONT (3) If there are stations on each floor, adjust one of the ONT antennas to the horizontal direction and the other one to the vertical direction, as shown in the floor figure.

Introduction to Wi-Fi Interference (1) In actual application scenarios, there are many Wi-Fi interference sources. These Wi-Fi interference sources affect the Wi-Fi throughput. Microwave oven CRT monitor

ONT Application Scenario ONTs, as the home terminals of an FTTH network, support only home applications and do not support commercial applications. Such as:

Security Level:

Thank you!

www.huawei.com

www.huawei.com HUAWEI TECHNOLOGIES Co., Ltd.

HUAWEI Confidential